When printing with continuous media, when pressing the Feed key, the printer will feed media out to a certain length. Extended Memory Installation 1. Please power off the printer before installing the cutter module. Supplies are warranted to be free from defect in material and workmanship for a period of six 6 months for media and twelve 12 months for ribbon from the date of shipment by Godex. DB9 female, pin assignment is as follows:
| Uploader: | Tozilkree |
| Date Added: | 6 November 2006 |
| File Size: | 64.92 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 95064 |
| Price: | Free* [*Free Regsitration Required] |
Page 4 defects in material and workmanship for 90 days except where ez-1020p denoted from date of invoice. Page 24 Clip in the right side of the cutter module 29 first,then secure the left side.
Page 21 Place the right side in first, and then fit the left side. Secure the PCB pillar onto the mainboard. Check the pins where the memory is to be connected to, then plug the memory card onto the mainboard. When printing, ribbon must be installed to transfer the print contents onto the media. By pressing ‘print’ button you will print only current page. Take off the media roll spindle.
Godex EZ-1200
Power off the printer, press and hold the Feed key. Page 17 Select the location of the driver.
Hold the cutter module and lock it with the two side screws Power on the printer after clearing the paper jam, the ez-12200p will return to the correct position automatically. Clip in the right side of the cutter module 29 first,then secure the left side. No other warranties, expressed or implied, are given. Extended Memory Installation 1. Dump Mode Power off the printer, press and hold the Feed key.
This manual also for: This warranty becomes void if the item is modified improperly installed, handled or used, or damaged by accident or neglect. Supplies are warranted to be free from defect in material and workmanship for a period of six 6 months for media and twelve 12 months for ribbon from the date of shipment by Godex.
Please power off the printer before installing the stripper module.
Direct thermal label printer Godex EZ+ – – English
Power on the printer. With plastic outer casing, the EZ series is designed to be a lightweight and a low cost printer for large variety of printing requirement. Feed the label through the two Label Guides to the Tear-off Bar. Align the label guides to the lablel edge.
gdoex Don’t show me this message again. Printer Options Installation 5. When printing labels, pressing the Feed key, the printer will feed one label at a time; if the label is not sent out in a correct position, then please proceed with the Auto Sensing see page Extended Memory Parts Peel off the first label, and feed the liner through the roller and the peel off bracket.
Please power off the printer before installing the extended memory. Table Of Contents 1. Data Terminal Equipment Printer Page Its features are as follows Page 5 Warranty Exclusions and Conditions Statement The warranties provided above are the only warranties applicable.
Place the label roll onto the Label Roll Core, Loosen and lift the upper print mechanism by pressing the locking tensons. Table of Contents Add to my manuals Add. Connect the cable to the parallel port on the printer and on the PC.