On freebios2, the i interrupt controller is never initialised, so it is understandable that if the vga bios has been playing with interrupts that after the STI intruction a random interupt vector is issued by the i – and hence the problems as reported. April 11, Neatorama’s Collection of Case Mods. Merry Christmas from The Tech Report staff! Despite how common Serial ATA ports are on high-end and even mid-range motherboards, there are still few hard disk options available and no Serial ATA optical drives on the market. This always seemed to happen at cs: Check that it is bytes long – i.

Uploader: Yozshuran
Date Added: 6 August 2017
File Size: 28.53 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 97428
Price: Free* [*Free Regsitration Required]

Then edit your Makefile again to include your video bios in the final merging.

With switch set to 1 original BIOS run:. Steam names the best-selling games of However it is easy enough to create your own using the steps above. May 10, The “Frame”.

The board serves up two Firewire ports and four USB 2. If you don’t, time to start capturing the output of the serial port and talking to the coreboot mailing list.

ComputerSphere – mounting the VIA Epia M motherboard

This step creates the appropriate makefiles and build directories for the epia-m. Since the EPIA-M is geared at small form factor systems where Serial ATA’s thin cabling would surely come in handy, it’s a little disappointing to see support left off the board.


April 14, The “Digg” Case. Both boards have overscan as an option, which stretches the desktop beyond the edges of the screen a little too far for some purposes. There should be drivers for the integrated devices. I absolutely did NOT need this system, so I have no idea why I am doing this, but let’s just do it for the good of all of us, except the ones who are dead, I guess.

VIA’s EPIA-M platform – The Tech Report – Page 2

Linux AGP support does not crash the system and I believe it to be fully working. July 21, The “Supra-Server”. As long as you have this command line set up correctly, and an os image in the right place, then FILO should proceed to boot into your Linux os.

May 13, The “Bender PC”. Dpia-m it does then you now have a working flash programming environment. Just 17 cm square, the EPIA-M is a midget sorry, little person among small form factor platforms. Ok so I appear to have found a decent review here: It is not directly downloadable, but you epiz-m capture it from a system running with the original bios, so you might as well capture it now.


Decide which chip you are going to use for corebootv2, and which chip you are going to keep the original working bios in, and mark them clearly on this switch. As epi-am how useful it would be – what do you want to do with it? July 07, The “Encyclomedia”. LG HU85L projector needs but two inches to cast a 90″ picture. LG HU85L projector needs but two inches to cast a 90″ picture.


Select the TV so that a blue line goes around it and then tick the box next to it. I wish I could find some decent benchmarks.

This howto assumes the use of FILO. It has been created using the following approximate steps:.

By contrast, the picture quality during bootup on a TV is awful. Honestly, there’s not enough room for anything else on the board. There are other areas which I consider ‘hackish’, in particular the setting up of the cardbus bridge. Nehemiah M Review Posted on May 19, August 31, The “Janus Project”. This page was last modified on 18 Januaryat If it does not, then set the switch back to 1, reboot the machine, and investigate further.