COPYSTAR 500CI DRIVER

I then resorted to basic power troubleshooting only to find no 24v or 12v coming from the power supply! Results 1 to 5 of 5. I attended site with the maintenance kit A and installed the drum first, error C cleared! First thing you should do is check and then recheck all connections that you messed with. It might be that the board is messing with your machine. Thanks all I returned and covered all my actions, checked all connectors and tested with no black dev and drum as they were new with no difference.

Uploader: Kishicage
Date Added: 4 April 2009
File Size: 45.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 23886
Price: Free* [*Free Regsitration Required]

Kyocera TASKalfa ci errors!! Your problem could be anywhere from the power supply, engine board to main board, but it just could be a 500fi in wrong.

If you dropped a screw and powered up the copier before finding it, that is a problem. We had a machine that indicated the left door open, but switches, xopystar harnesses and copgstar were not the answer. The time now is First thing you should do is check and then recheck all connections that you messed with. It might be that the board is messing with your machine. HI all I attended a Kyocera copystat with error c last week however when I arrived, the error did not present itself.

  KYOCERA TASKALFA 500 DRIVER

The machine had done k so recommended the maintenance kit A to be replaced. Whilst waiting for the maintenance kit, error C presented itself and believed it could be down to a faulty black charge roller. Tags for this Thread areabadblackcodeerrorkyocerapowerproblemsscreenwork.

Download Center

I checked the drums and developer units and ran long tests with no problems. After looking at your pic I can see that the screw was between two coystar mount capacators and probably shorted the 24 volt or the 5 volt line. Details vBulletin Mods by vBSocial.

I then resorted to basic power troubleshooting only to find no 24v or 12v coming from the power supply! After two coypstar with another tech our tech rep looking, they found a pinched wire on a system not connected to the door switch.

Hopefully this is all it is so I will be returning armed with a power supply and a motor control PWB. Any input on this would be of great help!

Thanks all I returned and covered all my actions, checked all connectors and tested with no black dev and drum as they were new with no difference. If at first you don’t succeed, redefine success.

Error Code Jam 80 Copystar CI

I followed the bulletin to check the black cleaning motor etc and found a screw 5500ci behind the Motor Control PWB and the metal bracket 500vi attaches to with burn marks around a resister on the PWB! Now when I power on the machine, the control panel backlight does not come on so its very hard to see the screen and it errors out on C which is a HDD error code!

  ASROCK K8UPGRADE VM800 VGA DRIVER

Bookmarks Bookmarks Digg del.

Get the Android App. If your display backlighting was working while copysstar screw was there it should still work. Results 1 to 5 of 5.

Whilst in this area, I swapped the black cleaning motor with the yellow as I wanted to see if the error code would change. I would start by just replacing the motor control board and see if the problem goes away.

Depemnding on where this supply is from will dictate what is damaged. Copystarr have a bad feeling the main board is knackered?!!! Great, so I installed the black developer unit only to get error C which was the error code we were first called out for. I attended site with the maintenance kit A and installed the drum first, error C cleared!