Boot Up Floppy Seek Enabling this option will test the floppy drives to determine if they have 40 or 80 tracks. Disabling this option reduces the time it takes to boot-up. It also coordinates communications with the PCI bus. Supports the Intel Pentium 4 processor to 3. Some graphic controllers which are not VGA compatible take the output from a VGA controller and map it to their display as a way to provide boot information and VGA compatibility.
|Date Added:||9 August 2012|
|File Size:||51.40 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Typematic Delay Msec Sets the delay time after the key is held down before it begins to repeat the keystroke. Power on the AC. Accelerated Graphics Port Slot: HDD Power Down When enabled and after the set time of system inactivitythe hard disk drive will be powered down while all other devices remain active. Backing up the hard drive is extremely important.
However, the color information coming from the VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller.
Biostar P4TSE-D2 – motherboard – ATX – Socket 478 – i865PE
Enabled Virus protection is activated. Date of Month Alarm You can choose which month the system will boot up. All the CMOS data will be loaded as defaults setting. The item offers several delay biostae to select you want.
If you have change the setting, you must let the system boot up until it goes to the operating system, before this functin will work. Former-Sts Restores the system to the status before power failure or interrupt occurs. Specific driver names mentioned on any of our pages do not mean that we have access to these drivers, nor that they will be found after a scan will be conducted.
Using Parallel port as Extended Capabilities Port.
Enabled defaultDisabled USB 2. Disabled DefaultEnabled. Low Pin Count Interface. Soif the AGP driver of the VGA card does not support the initialization featurethe display may work abnormally or not function after P4ttse. Item Options Date mm: One l4tse the reasons that Driver Detective is a computer professional favorite is because of its support staff.
Exit Without Saving Abandon all changes made during the current session and exit setup. Disabled defaultMaxVal.
Video Off Method This option determines the manner in which the monitor is goes blank. Case Open Connector S.
Biostar P4TSE-D2 – motherboard – ATX – Socket – iPE Overview – CNET
Accelerated Graphic Port Slot Z. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure.
It’s a community-based project which helps to repair anything. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup. This website does not contain any sort of hardware drivers database. Indicator light on key board does not turn on.
The first hard drive should always be connected to IDE1. By SPD defaultManual. CNR1 Ve rsion 1. Front Header A6.
To take advantage of this, simply click the help button, and Driver Detective will provide you with a form where you can explain the problem you’re having, provide feedback, or even to suggest a new feature.
Each category includes no, one or more than one setup items.
VIA Controller optional, but not support Version 7.