Figure 3 Dispenser Module Peel Lever Advanced Installation And Adjustment 5. Remove the top covers on both left and right sides. Redbeam Web Asset Tracking. Switching Ribbon Wound Ink-side Out Or Ink-side In Switching Ribbon Wound Ink-side in or Ink-side out The printer is produced to suit flexible applications, no matter with ribbon wound ink-side in manufacturing default , or with ribbon wound ink-side out.

Uploader: Doutaur
Date Added: 26 February 2006
File Size: 18.2 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73996
Price: Free* [*Free Regsitration Required]

Page 9 Connect the power cord as below.

Don’t have an account? Page 93 Install the ribbon and media. Connecting the Power Cord Before setting up and connecting the printer you should consider the following. Ethernet Interface The following port complies with Ethernet communication.


Making a Keyboard Form 1. Close the peeler module using the peel-off mechanism release lever.

Push down the peel-off mechanism release lever and lead the media under the peeler module. Guillotine Cutter with Paper Jam If there is paper jam inside guillotine cutter, check in Figure 1 and find where the screw under guillotine cutter. Please contact your local Argox reseller if you need this cable. Centronics allows a much higher communication speed than serial.


Page 79 Figure Ribbon Tension Adjustment Arogx default setting when shipped from Argox factory is shown as Figure 2 — the two arrows are in line with the black line. Recommended to be at least as wide as media ” Print a test page to check print quality. Got it, continue to print.

Argox X-1000VL User Manual

English, Simplified Chinese, Traditional Chinese. Head Latch Bracket 3.

If you use direct thermal, set with panel, Windows driver or command. Check all the data on the showing screen, if it is correct, click “Finish”. Find a to lay down the blade by turning the screw counter-clockwise.

Argox XVL (TT) Industrial Barcode Label Printer

The LCD displays this message: Check the Cam as screwdriver marked in Figure 1, find a slotted xelelnt turn counter-clockwise as Figure 2. Adjust Position of Label Sensor Function of the label sensor is to detect the gap, notch, or holes of labels, to help the printer for accurate print positions and label length. Repeat the same process until the printing quality is well balanced on both ends of the label.

The simplest way to connect to other hosts not PC compatible or terminals is: Form Control Functions Function Enter or exit from keyboard mode Backspace Delete the last typed character Next form if more than one form exists Enter – Select the form – End of typed data The front panel includes: Interface Specifications This section presents the interface specifications of IO ports for the printer.


Make sure the Ribbon Bracket is at its lowest position first; then tight up the screws by rotating clockwise.

Table of Contents 1. Scan product name and number from printed bar codes using the barcode reader. The following describes how to solve ribbon wrinkle accordingly. Print Head Print Line Position When the label aeries exhibits locally inferior printing quality and the ribbon is not wrinkled, the position of the print head shall be adjusted, and serifs adjusting position is shown as Fig.

Enter Printer name i. For the XVL, ignore this step.

Figure 3 Ribbon Supply Spindle