I put everything in c: Now we add ppp-connection dialing scripts: We write the vendor and product parameters. And as computers a little — it is desirable to distribute this Wellcom for all, independently from each other. For a start we need to define vendor and product code for our modem. We power off a router. We leave on Ctrl-C.
|Date Added:||18 February 2015|
|File Size:||46.87 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
драйвер anydata adu ea windows 7
In open telnet session we give command: Without releasing reset, we include power supply of a router and we wait for emergence of the indicator – “cloudlet” of connection of the network device. We power off a router.
After initial inclusion of a router he aeu-300a in my home local area network with the address For work with telnet under Windows I recommend to use putty. We check start of port of the abydata We put the IP address of the network interface card of the computer in Files of dialing at us are already saved, it is necessary to start port of the modem only once again, manually.
From the first not always it turns out to make it in time, it is necessary to be trained.
Now we insert the modem into the USB port of a router and we watch the events. If you have any complaints about this article or you want this article to be deleted, please, drop an email here: We wait about 5 minutes so far the firmware “will be unrolled”, the status indicator will light up after that.
We swing the firmware checked by me which is option of a firmware of Oleg. We put IP of the network interface card of the computer on automatic receipt of the address. We write the vendor and product parameters. Do not forget to change them for the devices!
Now we add ppp-connection dialing scripts: We start, we specify the router address in settings anyrata Shared knowledge makes the world better. And as computers a little — it is desirable to distribute this Wellcom for all, independently from each other. Important — all the rest if suddenly it is, from a router it is disconnected!
On the screen something has to appear similar: We rename it into firmware. We leave on Ctrl-C.
We come into a adu–300a under the telnet protocol address For a start we need to define vendor and product code for our modem. We believe that the knowledge, which is available at the most popular Russian IT blog geektimes.
We distribute the 3G-Internet on all apartment (to Anydata ADU-300A and D-Link DIR-320)
Theoretically, this question was already repeatedly discussed on open spaces of an immense network, I decided to reduce everything in one “the instruction for lazy”. Thus, it will anydataa possible to see what occurs in the course of dialing: We are overloaded and try!
For each device they are unique.
For completion of connection we return to the telnet window and we press Ctrl-C. Pay attention — in our script dialup specified the nodetach parameter therefore we will remain in open session before clicking of Ctrl-C. We connect a router the enclosed lace to the network interface card of the computer. The way should not have spaces and other than the English characters.