Double click on Utilities. And the resulting array would be just as fast as the Ultra striped pair. Portable External Hard Drive. Probably wouldn’t hurt to try on the g3, as well This page documents how to convert one of these cards to work in the Mac.

Uploader: Yozshukinos
Date Added: 8 March 2013
File Size: 27.68 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12955
Price: Free* [*Free Regsitration Required]

Using Acqrd when you should use Single will result in similar behavior. But just for the record, during my searching the web about that problem I found that topic in the forum of axard french site Macbidouille. However no liability is accepted for any.

Great features and good sound, but fills a narrow niche Great features and good sound, but fills a narrow niche by Ty Pendlebury. System Requirements OS Required.

We wish you hours of fun with it. R19 must be replaced by a 1k Ohm resistor Removed resistors Installed 1k Ohm resistor Software modification Now that the hardware modifications are complete, the firmware needs to be flashed.


Cables are easily damaged because of un-proper fold. Now that the hardware modifications are complete, the firmware needs to be flashed.


Intellex Digital Video Management System. I also tried the same with my previous startup disk known working! If you try to use a Western Digital drive as a single drive only drive on cable and set the jumper to Master, you’ll get much the same symptoms as you had.

ACARD AECM (*) PCI ATA/ Hard Drive at

I’m still trying to find the top of my workbench though. It’s just as if there was no disk connected. Register a new account. Connect 4-pin power cable to IDE hard drive.

Then start to install an new Mac OS X on the hard drive. Yep, I’d say from the looks of things, you need to format your drives with the device you want to connect them to. Asc-6280m a new cable known to be good.

ACARD AEC 6280M – storage controller – ATA-133 – PCI

This manual contains materials protected under International Copyright Laws. Actually, I didn’t intend to use the card in this one. This is true wether the card is plugged in or not.

I also assign it a slight doubt factor because it’s been several months since I read the documentation, and I could be misremembering. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual. Close the Mac case.


Aec-62880m using a smaller HD under GB and see if that works. Be sure hardware has installed correctly. I am sorry I came so late acarr the thread.

Boot OS 9 from solo drive. Oh, and one other irrelevant thing, which might help someone in the future with a similar problem reading this thread. Well, it’s absolutely not vital since I wil use this disk for storage. April Copyright and Trademarks The information of the product in this manual is.


R19 must be replaced by a 1k Ohm resistor. I’m sure this problem will be solved by third party Aaec-6280m software makers Sign up for a new account in our community. Operation is subject to the following two conditions: User s Manual Version: